Browse over 15000 machines
Showing all 71 results
-
Equip-5269-Hayssen Ultima 12-16 HR Stainless Wash Down Machine
Sale! Original price was: $25,000.00.$15,000.00Current price is: $15,000.00.Hayssen Ultima 12-16 HR Stainless Hayssen This machine is perfect for USDA wash down environments.
Equip-5941-Mettler Toledo Hi-Speed XE Hi Speed
Sale! Original price was: $14,000.00.$9,500.00Current price is: $9,500.00.2008 Mettler Toledo Hi-Speed Model XE Carton / Case Checkweigher . This Mettler Toledo Hi-Speed carton/case checkweigher is perfect for chekweighing cartons and cases. The belt width is 12 wide. The weigh table is chain driven.
Equip-5960-Meyer Industries Meyer C Bucket Elevator
Sale! Original price was: $6,000.00.$3,500.00Current price is: $3,500.00.Meyer C Bucket Elevator, Model PA-132-12C . This Meyer Bucket Elevator is in excellent condition.Meyer bucket elevator, model PA-132-12-C, 17 x 16 x 9′ H with 12 x 4-1/2 x 2-1/2 H bucket
Equip-6032-Zip-Pak TopZip III
Sale! Original price was: $17,500.00.$12,500.00Current price is: $12,500.00.2002 Zip-Pak/AMI TopZip III available . 240 V – 3 phase, 20A, 60Hz. 80 psi @20 scfm. Stop/start signal to machine and estop tie in GE Fanuc servos/drives. Ultrasonic zipper crush w/ Banson 900 BCA power supply. Integrated zipper unwind and film outfeed dancer.
**Additional tack punch rail with punches included on outfeed the red pearl punch blocks shown by the outfeed dancer**
Equip-6033-Zip-Pak TopZip IV
Sale! Original price was: $20,000.00.$12,500.00Current price is: $12,500.00.2007 Zip-Pak TopZip IV available . 240 V – 3 phase, 20A, 60Hz. 90 psi @4.0 cfm. Stop/start signal to machine and estop tie in GE Fanuc servos/drives. Ultrasonic zipper crush w/ integrated Zippak power supply. Integrated zipper unwind and film outfeed dancer.
Equip-6040-All Fill PW-12
Sale! Original price was: $9,500.00.$6,000.00Current price is: $6,000.00.All Fill PW-12 Checkweigher in good condition. 8.5 x17 and twin weight cells side by side table
Equip-6068-Squid Ink SQ/2 Scorpion
Sale! Original price was: $750.00.$500.00Current price is: $500.00.Squid SQ/2 Scorpion Ink Jet Printer in good condition.
Equip-6083-Axon EZ-48-5RB Shrink Tunnel
Sale! Original price was: $2,000.00.$1,000.00Current price is: $1,000.00.This 2002 EZ-48-5RB Axon Shrink Tunnel is in good condition. Aperture 7 1/2W x 6 1/2T. 220V 60 HZ 32 Amps 60 PSI.
Equip-6110-Videojet DataFlex Plus
Videojet DataFlex Plus high resolution thermal printer
Equip-6121-High Performance Packaging
Sale! Original price was: $300.00.$299.00Current price is: $299.00.5 ft Flat Roller Conveyor
Equip-6156-Anritsu X-Ray Machine, Model KD7405AWH
Sale! Original price was: $25,000.00.$15,000.00Current price is: $15,000.00.Anritsu X-Ray Machine, Model KD7405AWH, S/N 4600155116. Maximum weight 500grams at 120 per minute. Max dimensions are 120mm wide x 40mm high
Equip-6210-Ishida CCW-NZ-214W-S/30 scale for parts
Sale! Original price was: $6,000.00.$4,000.00Current price is: $4,000.00.This Ishida CCW-NZ-214W-S/30 scale for parts. If you have this model scale and need a parts machine, this is a perfect for you.
Equip-6227-2008 Yamato Dataweigh Multihead Scale ADW-514SN
Sale! Original price was: $65,000.00.$55,000.00Current price is: $55,000.00.2008 Yamato Dataweigh Multihead Scale ADW-514SN . This Yamato scale has 14 heads, smooth buckets, and a painted body. The HMI was upgraded to the latest HMI from Yamato.
Equip-6228-2005 Yamato Dataweigh Multihead Scale ADW-514SN
Sale! Original price was: $55,000.00.$45,000.00Current price is: $45,000.00.2005 Yamato Dataweigh Multihead Scale ADW-514SN . This Yamato scale has 14 heads, smooth buckets, and a painted body. The HMI was upgraded to the latest HMI from Yamato.
Equip-6229-2001 Yamato Dataweigh Multihead Scale ADW-414SNX
Sale! Original price was: $40,000.00.$30,000.00Current price is: $30,000.00.2001 Yamato Dataweigh Multihead Scale ADW-414SNX . This Yamato scale has 14 heads, smooth buckets, and a painted body. This scale was originally paired with a TNA bagger. It is perfect for a TNA bagger because the communication is already built in. However, this scale can go over any bagger. The HMI was upgraded to the latest HMI from Yamato.
Equip-6230-2001 Yamato Dataweigh Multihead Scale ADW-414SNX
Sale! Original price was: $40,000.00.$30,000.00Current price is: $30,000.00.2001 Yamato Dataweigh Multihead Scale ADW-414SNX . This Yamato scale has 14 heads, smooth buckets, and a painted body. This scale was originally paired with a TNA bagger. It is perfect for a TNA bagger because the communication is already built in. However, this scale can go over any bagger. The HMI was upgraded to the latest HMI from Yamato.
Equip-6234-2014 Kliklok Woodman Apache Continuous Motion Vertical Form-Fill-Seal Machine
Sale! Original price was: $75,000.00.$45,000.00Current price is: $45,000.00.2014 Kliklok Woodman Apache Continuous Motion Vertical Form-Fill-Seal Machine . This Woodman Apache baggers is rated up to 200 bags per minute. The electrical requirements are 480V, 80AMPS, 60HZ, 3PH, Disconnect Rating 30A, Short-circuit rating 100KA, and Largest circuit amp 25. Also, this Woodman comes with a Videojet DataFlex 6420 printer.
Equip-6243-EPI Label Applicator for VFFS Packaging Machinery Model Number UII
Sale! Original price was: $3,500.00.$1,000.00Current price is: $1,000.00.EPI Label Applicator for VFFS Packaging Machinery Model Number UII This EPI label applicator is in good working operational condition. This EPI label applicator is ready to be installed for production. Reach out today, this label applicator will not last long.
Equip-6244-EPI Label Applicator for VFFS Packaging Machinery Model Number GGHCMB
Sale! Original price was: $3,500.00.$1,000.00Current price is: $1,000.00.EPI Label Applicator for VFFS Packaging Machinery Model Number GGHCMB This EPI label applicator is in good working operational condition. This EPI label applicator is ready to be installed for production. Reach out today, this label applicator will not last long.
Equip-6246 – General Purpose Conveyor
Sale! Original price was: $500.00.$100.00Current price is: $100.00.General Purpose Conveyor 18″L x 12″W
Equip-6248-Trion Airboss Blower
Sale! Original price was: $200.00.$199.00Current price is: $199.00.Trion Airboss Blower
QTY 2
Equip-6258 Ishida 2002 CCW-EM-214/30-PB combination weigher
Sale! Original price was: $45,000.00.$25,000.00Current price is: $25,000.00.Ishida 2002 CCW EM 214/30 PB Combination Weigher
Equip-6261 2003 Ishida CCW-M-224B-14/15-PB 24 Head with Booster Hopper Combination Weigher
Sale! Original price was: $80,000.00.$50,000.00Current price is: $50,000.00.2003 Ishida CCW-M-224B-14/15-PB Combination Weigher. This Ishida scale is set up to do 4 separate dumps. This Ishida combination weigher is perfect for multi lane fills for can lines or thermoform machines with multiple fill pockets. This scale is also a very high speed scale up to 300 WPM. It can be split to fill up to 6 different products at the same time.
Equip-6262 2005 Ishida CCW-M-214W-S/20-PB Combination Weigher
$60,000.002005 Ishida CCW-M-214W-S/20-PB Combination Weigher
Equip-6263 2000 Ishida CCW-M-214W-S/20-PB Combination Weigher
Sale! Original price was: $50,000.00.$40,000.00Current price is: $40,000.00.2000 Ishida CCW-M-214W-S/20-PB Combination Weigher
Equip-6264 2005 Ishida CCW-M-214W-S/20-PB Combination Weigher
Sale! Original price was: $55,000.00.$50,000.00Current price is: $50,000.00.2005 Ishida CCW-M-214W-S/20-PB Combination Weigher
Equip-6265 2005 Ishida CCW-M-214W-S/20-PB Combination Weigher
Sale! Original price was: $55,000.00.$50,000.00Current price is: $50,000.00.2005 Ishida CCW-M-214W-S/20-PB Combination Weigher
Equip-6274-2010 Matrix Packaging Machinery Elete DS 13
Sale! Original price was: $65,000.00.$60,000.00Current price is: $60,000.00.2010 Matrix Packaging Machinery Elete DS13 vertical form fill seal bagger.
Maximum bag dimensions: 13 inches wide x 15.75 inches long
Minimum bag dimensions: 3 inches wide x 3 inches long
Double stack high speed stepper electric sealing system
Gusset Assembly
Output: up to 150 bags per minute
Allen-Bradley MicroLogix 1500 controls
Equip-6275-2002 Matrix Packaging Machinery Pro Series 200915SLXRX vertical form fill seal machine
Sale! Original price was: $45,000.00.$30,000.00Current price is: $30,000.00.2002 Matrix Pro series 200915SLXRX VFFS packaging machine. This 2002 Matrix Pro vertical form fill seal packaging machine is equipped with 10″ wide jaws and a 16″ long back seal. This Matrix packaging machine also has tuckers for making gusseted bags.
Equip-6281-Pack All Accumulation Packoff Table Model AT48SSWD Turn Table
Pack All Accumulation Packoff Table Model AT48SSWD Turn Table
Equip-6285-Therma Kleen Therma Steem XL3 Dry Vapor Steam Cleaner
Sale! Original price was: $13,000.00.$9,000.00Current price is: $9,000.00.Therma Kleen Therma Steem XL3 Dry Vapor Steam Cleaner – The only USA made dry vapor steam cleaner, THERMA-KLEEN® THERMA-STEEM® Industrial XL3 model is our newest and most powerful in the THERMA-STEEM® line of equipment. The Industrial XL3 model boasts continuous pressure of 155 psi and 365°F temperatures. Using this machine, with continuous fill capabilities, could not be easier. Begin by filling the water reservoir with water, plug into a 3-phase electrical outlet and within minutes you will be able to being limitless cleaning with “Green Technology”.
Equip-6287-Executive Office wrap around desk
Sale! Original price was: $1,250.00.$750.00Current price is: $750.00.Executive Office wrap around desk.
Equip-6288-Executive Office wrap around desk with file Cabinets and Credenza
Sale! Original price was: $2,500.00.$2,000.00Current price is: $2,000.00.Executive Office wrap around desk with file Cabinets and Credenza. Computer and monitors not included.
Equip-6292 – Ishida 2004 Scale Model CCW-M-214W-S60-PB
Sale! Original price was: $65,000.00.$55,000.00Current price is: $55,000.00.Ishida Scale Model CCW-M-214W-S60-PB. This scale was pulled out of a brand name cereal company. This Ishida includes $40,000 dust covers from Heat and Control. The dust cover is great for keeping dust contained if your product is dusty. It also is a great feature for SQF, to keep product safe from outside contaminants. This scale will not last long.
Equip-6293 – Ishida 2004 Scale Model CCW-M-214W-S60-PB
Sale! Original price was: $65,000.00.$55,000.00Current price is: $55,000.00.Ishida Scale Model CCW-M-214W-S60-PB. This Ishida includes $40,000 dust covers from Heat and Control. The dust cover is great for keeping dust contained if your product is dusty. It also is a great feature for SQF, to keep product safe from outside contaminants. This scale will not last long.
Equip-6294 – Ishida 2012 Scale Model CCW-R-214W-1S/08-PB
Sale! Original price was: $85,000.00.$70,000.00Current price is: $70,000.00.2012 Ishida Scale Model CCW-R-214W-1S/08-PB. This scale was pulled out of a brand name cereal company. This Ishida includes $40,000 dust covers from Heat and Control. The dust cover is great for keeping dust contained if your product is dusty. It also is a great feature for SQF, to keep product safe from outside contaminants. This scale will not last long.
Equip-6295-Mettler Toledo Safeline Metal Detector 8 inch Aperture
Sale! Original price was: $5,500.00.$4,000.00Current price is: $4,000.00.8″ aperture Mettler Toledo Safeline Metal Detector .
Equip-6298-Ishida Model DACS-W-003-SB/PB-I Checkweigher
Sale! Original price was: $12,500.00.$9,000.00Current price is: $9,000.00.Ishida Model DACS-W-003-SB/PB-I Checkweigher. Job#13282. Serial number 46452. Built in 2000. Weight capacity: 300 grams. First conveyor measures. 14.75 in. x 5.875 in. Second conveyor measures 13.75 in. x 6.25 in. Stainless Steel Base. O/A Dim: 29 in. long x 25 in. wide x 61 in. tall not including the pallet. Speeds of 300 weighments per minute (wpm).
Equip-6299-Ishida Model DACS-W-003-SB/PB-I Checkweigher
Sale! Original price was: $12,500.00.$9,000.00Current price is: $9,000.00.Ishida Model DACS-W-003-SB/PB-I Checkweigher. Job#13280. Serial number 46450. Built in 2000. Weight capacity: 300 grams. First conveyor measures 13.5 in. x 5.25 in., second 13.75 in. x 5.875 in. Stainless steel base. O/A Dim: 29 in. long x 29 in. wide x 63 in. tall not including the pallet. Speeds of 300 weighments per minute (wpm).
Equip-6301-Ishida Model DACS-W-003-SB/PB-I Checkweigher
Sale! Original price was: $12,500.00.$9,000.00Current price is: $9,000.00.Ishida Model DACS-W-003-SB/PB-I Checkweigher. Job# 00/13284. Serial number 46454. Built in 2000. Weight capacity: 300 grams. First conveyor measures 15.75 in. x 5.875 in. Second conveyor measures 15.75 in. x 5.875 in. Stainless steel base. O/A Dim: 28 in. x 25 in. x 61 in. tall not including the pallet. Speeds of 300 weighments per minute (wpm).
Equip-6303-Hapman Flexible Screw Feeder
Sale! Original price was: $9,500.00.$8,000.00Current price is: $8,000.00.Hapman Flexible Screw Conveyor. Plastic hopper. Screw is approximately 160 in. long. No drive motor. Hopper Inside dimensions are 35 in. x 35 in. x 30 in. deep approx. Screws are 3 in. diameter.
Equip-6310-Matrix Packaging Machinery Prostar211315WP
Sale! Original price was: $50,000.00.$40,000.00Current price is: $40,000.00.2007 Matrix Prostar Bagger in good condition, available . Matrix Packaging Machinery ProStar211315WP Vertical Form Fill and Seal Machine with Smart Jaw Technology. Minimum Bag Size 2 in W x 3 in L, Maximum Bag Size 13 in W x 15 in L Depending on Configuration, Etc. 16 in long Vertical Seal Bars. 14 in wide Horizontal Seal Bars. 12 in L Side Pull Down Belts. Film Registration. Parker CTC Digital Touch Controls. (3) Eurotherm Solid State Temperature Controllers. S/S Frame with Casters. 220 V, 3 Ph, 60 Hz, 20 Amp, 80 PSI 10-23 CFM. S/N: SB07092.
Equip-6316-Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table
Sale! Original price was: $3,500.00.$3,000.00Current price is: $3,000.00.Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table. 60 in. diameter at 30 in. tall. SN: R1150902. Only one turn table per lot.
Equip-6318-Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table
Sale! Original price was: $3,500.00.$3,000.00Current price is: $3,000.00.Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table. 60 in. diameter at 30 in. tall. SN: R1190405. Only one turn table per lot.
Equip-6319-Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table
Sale! Original price was: $3,500.00.$3,000.00Current price is: $3,000.00.Excel Packaging Accumulation Packoff Table Model PP60LS Turn Table. 60 in. diameter at 30 in. tall. SN: R1190406. Only one turn table per lot.
Equip-6323-Micro Thermics Electra UHT/HTST Pasteurizer
Sale! Original price was: $70,000.00.$69,999.00Current price is: $69,999.00.Used Electra UHT/HTST Pasteurizer with:
Speed: up to 3000 milliliters per minute
dependent on product specifications
Maximum inlet temperature: 130°F
Dual product inlets
Product pump with digital speed control
(1) Homogenizer break
(1) Product pre-heater: .5 inch tubing
(1) Product final heater: .5 inch tubing
Thermocouples in product lines: 5
Thermocouples in utiility lines: 6
Internal holds tubes: 15 seconds at 1 liter per minute
Panel hold tubes: 8 seconds at 1 liter per minute
Automatic fill control
Flow meter with flow based pump control
Max pump pressure: 175 PSI (12 bar)
Electrical: 208 Volts, 60 Hz, 3 Phase
Equip-6325-OCS HC-A 3″W x 6″L Checkweigher
Sale! Original price was: $25,000.00.$24,999.00Current price is: $24,999.00.Used OCS HC-A 3 Belt Checkweigher with:
Speed: up to 600 pieces per minute
Dependant on product size and specifications
Maximum capacity: 100 grams
Weigh belt:
Length: 6 inches
Width: 3 inches
Infeed conveyor belt:
Length: 11.75 inches
Width: 3 inches
Discharge Belt:
Length: 17.75 inches
Width: 3 inches
Air reject
Electrical: 240 Volts, 60 Hz,
Equip-6327-Patterson Kelley 1 CU.FT. Stainless Steel V Blender
Sale! Original price was: $13,500.00.$13,499.00Current price is: $13,499.00.Used Patterson Kelley V Blender with:
Working capacity: 1 cubic foot
Max density: 60 pounds per cubic foot
Discharge height: 31 inches
Butterfly bottom flange
(2) Outer covers:
Diameter: 12.5 inches
Intesifier bar
E Stop
(2) Lenze Ac variable speed motors
Electrical: 230/460 Volts, 3 Phase, 60 Hz
Equip-6328-Hytrol Flat Belt Conveyor 253″
Sale! Original price was: $7,500.00.$7,499.00Current price is: $7,499.00.Used Hytrol Flat Belt Conveyor with:
Belt:
Length: 253 inches
Width: 10 inches
Infeed Height: 42.5 inches
Guard rail height: 2.25 inches
Mounted on casters
Lenze Ac Tech variable speed drive
.5 Horsepower motor
Electrical: 230/460 Volts, 60 Hz, 3 Phase
Equip-6329-G3 Executive 5L Short Path Distillation Kit
Sale! Original price was: $40,000.00.$39,999.00Current price is: $39,999.00.Used 5L Short Path Distillation Kit:
Batch Capacity: 2500 milliliters
Optimum capacity: 900-1500 milliliters
Main body fraction flow rate: up to 800 grams per hour
Batch duration: 4-8 hours
Reactor Flange distillation head: 150 millimeters
Distillation column: 100 millimeters
Secondary Cold Finger Condenser:
Use with:
Jacketless condenser, hot condenser, high efficiency fraction collection
(2) Distillation head inserts:
Temperature-controllable fluid-filled finger insert
Evacuated, Vigreux-indented insert
Distillation Head: PDH-2S (silvered)
LS-PMK-S Vacuum Pump Manifold Kit
LS-SPK-5EK-120-UL SPD Electronics Kit
Heating mantle max temperature: 260° Celcius
Electrical: 120 Volts, 10 Amps
Equip-6330-NEW Ishida RVE-216B-1D30-PB Twin Discharge Scale
Sale! Original price was: $105,000.00.$104,999.00Current price is: $104,999.00.This NEVER USED Ishida RVE-216B-1D30-PB Scale is a twin discharge scale for running either twin VFFS vertical form fill seal machines or HFFS horizontal form fill seal machines in duplex. See the pictures in the listing for all of the dimensional drawings.
Equip-6342-Mentpack Vertical Artistick +/4/R Four Lane Stick pack machine
Sale! Original price was: $40,000.00.$35,000.00Current price is: $35,000.00.Mentpack Vertical Artistick +/4/R Four Lane Stick pack machine Form Fill and Seal machine. This Ment pack 4 lane stick pack machine is very simple and easy to run. Overall film web width is 160mm equaling 40 mm per stick pack.
Equip-6347 Breakroom Cabinets with Frigidaire Refrigerators
Sale! Original price was: $4,000.00.$3,000.00Current price is: $3,000.00.High quality Breakroom / Kitchen Cabinets with Frigidaire Refrigerators.
Equip-6348 Breakroom Table with real Onyx Table Top
Sale! Original price was: $1,500.00.$1,000.00Current price is: $1,000.00.Breakroom Table with real Onyx Table Top
Equip-6349 Filing Cabinets
Sale! Original price was: $300.00.$200.00Current price is: $200.00.4 Drawer filing cabinets filled with electrical drawings and parts manuals for machines such as Hayssen, Matrix, Yamato, Ishida, Deamco, Viking, Rovema, Woodman, Eriez, Key Iso Flo.
Equip-6350 Filing Cabinets
Sale! Original price was: $50.00.$40.00Current price is: $40.00.4 Drawer filing cabinets
Equip-6354-Markem Imaje X40 Printer
Sale! Original price was: $4,500.00.$3,500.00Current price is: $3,500.00.Markem Imaje Smart Date X40 printer with controller and cables.
Equip-6356 -Yamato Corp. 2009 ADW-524-SW Combination Weigher
Yamato Corp. 2009 ADW 524 SW Scale with dual discharge configuration for filling two packaging lines. The weight range is 20G-2000G, max speed 300W per minute, 220/240 volts. It is all stainless and USDA rated. This Yamato scale is perfect for high speed and or high weight fills. This scale was just pulled out of production and is ready for shipment and deployment.
Equip-6358-Smalley Intralox Flighted Z-Elevator
Smalley Flighted Z-ElevatorConveyor This 16 wide belt conveyor includes:
Intralox S800 flat top chain, 16wide with 6 high scoops on 6 centers.
16 foot discharge elevation
48″ infeed length
96″ discharge length
Equip-6359 -Yamato Corp. Sigma 2009 ADW-714-SV Combination Weigher Stainless Washdown
Yamato Corp. Sigma 2009 ADW 714 SV Scale. The weight range is 20G-3000G, max speed 300W per minute, 220/240 volts. It is all stainless and USDA rated. This Yamato scale is perfect for high speed and or high weight fills. This scale was just pulled out of production and is ready for shipment and deployment.
Equip-6361-Ingersoll Rand 400 Gallon Receiver Tank For Compressed Air
Sale! Original price was: $2,000.00.$1,500.00Current price is: $1,500.00.Ingersoll Rand 400 Gallon Receiver Tank for Compressed Air applications. The dimensions are 96″ H x 36″ D. Rated for 165 PSI max. manufactured by Samule Pressure Vessel Group. Part number A10055 Samuel Pressure Vessel Group.
Equip-6362 -Yamato Corp. ADW-714-SW Combination Weigher Stainless Washdown
Yamato Corp. ADW 714 SW Scale. The weight range is 20G-3000G and 220/240 volts. It is all stainless and USDA rated. This Yamato scale is perfect for high speed and or high weight fills. This scale was just pulled out of production and is ready for shipment and deployment.
Equip-6363-Hayssen Ultima 12-19HR with Allen-Bradley PanelView Plus 700 Touch
Hayssen Ultima 12-19HR VFFS bagger. Hayssen S/S Bagger, Model: ULTIMA12-19HR with Allen-Bradley PanelView Plus 700 Touch Screen HMI and Allen-Bradley CompactLogix L32E PLC with (7) I/Os, Relays, Switches and Markem-Imaje SmartDate X40 Coder.
Equip-6364-Mettler Toledo Safeline S/S Metal Detector 6 inch Aperture Model V3
Sale! Original price was: $5,500.00.$4,000.00Current price is: $4,000.00.Mettler Toledo Safeline S/S Vertical Pass-Thru Metal Detector, Model: V3, with Aperture: 6″ Diameter
Equip-6365-2017 Heat and Control Fastback CV-FB-90E-G2 Complete with Stands
2017 Heat and Control Fastback CV-FB-90E-G2 units complete with stands . This Fastback 90E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 12″ Wide X 6’6″ Long X 4″ The utility requirements are 460V/3PH/60HZ.
Equip-6366-2017 Heat and Control Fastback CV-FB-90E-G2 Complete with Stands
2017 Heat and Control Fastback CV-FB-90E-G2 units complete with stands. This Fastback 90E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 16″ Wide X 6’6″ Long X 4″ The utility requirements are 460V/3PH/60HZ.
Equip-6367-2017 Heat and Control Fastback CV-FB-90E-G2 Complete with Stands
2017 Heat and Control Fastback CV-FB-90E-G2 units complete with stands. This Fastback 90E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 16″ Wide X 6’6″ Long X 4″ The utility requirements are 460V/3PH/60HZ.
Equip-6368-2017 Heat and Control Fastback CV-FB-90E-G2 Complete with Stands
2017 Heat and Control Fastback CV-FB-90E-G2 units complete with stands. We have many stand at different heights. This Fastback 90E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 18″ Wide X 6′ Long X 8″ The utility requirements are 460V/3PH/60HZ.
Equip-6369-2017 Heat and Control Fastback CV-FB-260E-G3 with Revolution Discharge Complete with Stands
2017 Heat and Control Fastback CV-FB-260E-G3 unit complete with stands. This Fastback 260E is designed to feed Ishida and Yamato combination scales with a rotary discharge mechanism allowing product to be discharged or the Revolution stops and the product will continue on to another line to the end of the conveyor. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 24″ Wide X 13′ Long. The utility requirements are 460V/3PH/60HZ.
Equip-6370-2017 Heat and Control Fastback CV-FB-260E-G3 with Revolution Discharge Complete with Stands
2017 Heat and Control Fastback CV-FB-260E-G3 unit complete with stands. This Fastback 260E is designed to feed Ishida and Yamato combination scales with a rotary discharge mechanism allowing product to be discharged or the Revolution stops and the product will continue on to another line to the end of the conveyor. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 24″ Wide X 10′ Long. The utility requirements are 460V/3PH/60HZ.
Equip-6371-2017 Assortment of Heat and Control Fastback Stands for 90E and 260E fastback units
Assortment of Heat and Control Fastback stands for 90E and 260E fastback units. You need these stands to install fastbacks. We have many stands at different heights. We have stands at 40″, 24″ and 31″ high.
Showing all 71 results
