Fruits & Vegetables Packaging Equipment
Showing 501–600 of 1786 results
-
Equip-5604-Meyer Industries MD-462-SS
Meyer Z Bucket Elevator model MD-462-SS This Meyer MD-462-SS bucket elevator is complete and ready for production. The dimensions are: infeed length 64, discharge length 36, and discharge height of 20′. The bucket dims are 24 x 5 x 3. HPP can customize these to fit your application dimensions.
Equip-5605-Meyer Industries MD-462-SS
Meyer Z Bucket Elevator model MD-462-SS This Meyer MD-462-SS bucket elevator is complete and ready for production. The dimensions are: infeed length 64, discharge length 36, and discharge height of 20′. The bucket dims are 24 x 5 x 3. HPP can customize these to fit your application dimensions.
Equip-5606-Frazier & Son Whiz Lifter
Frazier and Sons Z bucket elevator Whiz Lifter This Frazier and Sons Whiz Lifter bucket elevator is in excellent running condition. The Dimensions are: Bucket dims are 18 x 5 x 4, infeed length is 16′, discharge height is 15′, and discharge length is 4′. HPP can customize this elevator to fit your application.
Equip-5607-Frazier & Son Whiz Lifter
Frazier and Sons Z bucket elevator Whiz Lifter This Frazier and Sons Whiz Lifter bucket elevator is in excellent running condition. The Dimensions are: Bucket dims are 18 x 5 x 4, infeed length is 16′, discharge height is 15′, and discharge length is 4′. HPP can customize this elevator to fit your application.
Equip-5608-Frazier & Son Whiz Lifter
Whiz Lifter Frazier and Sons Z bucket elevator This Frazier and Sons Whiz Lifter bucket elevator is in excellent running condition. The Dimensions are: Bucket dims are 18 x 5 x 4, infeed length is 16′, discharge height is 15′, and discharge length is 4′. HPP can customize this elevator to fit your application.
Equip-5609-Seal-A-Tron T-3014
This Seal-A-Tron T-3014 is in great condition. It was purchased in 1998 brand new and sparingly in the first year and then never again.
Tunnel Dimensions: 30W x 13H x 48L
Electrical: 208/240V – 3PH – 40/50AMP
Heater Capacity: 208V=12KW / 240V=16KW
Varilocety: 1,000-3,6000rpm
Weight: 690 lbs.
Roller Diameter: 1/2Equip-5610-Matrix Packaging Machinery Mercury 2840R with REB liquid piston filler
Matrix Mercury 2840R bagger with REB liquid piston pump filler This Matrix PM Mercury bagger is a 2015 and has minimal use. It is in pristine condition. HPP can put any filler on top of this bagger to suit your specific filling needs. The filler has a fluid capacity of 1.7oz oz to 4.8 oz with the existing 1.5 diameter cylinder and piston. The cylinder can be upgraded to a 2 diameter cylinder for around $1,000.00. The 2 diameter cylinder has a fluid capacity of 1.7oz to 8.7oz.
Matrix Mercury 2840R available in great working condition. The max bag size is 11 wide x 15.75 long and the min bag size: 2 wide x 3 long. Electrical: 220/240VAC, 3Ph, 50/60Hz. Air: 12CFM @ 80psi. The Matrix also has an REB liquid pump filler on top.Equip-5611-Ishida CCW-M-224B-4/15-WP
Ishida CCW-M-224B-4/15-WP Stainless dimpled wash down scale with 1×4 pocket bottom fill handling TH-Lowerator assembly filling This scale is perfect for cheese items and non free flowing type products such as gummies, soap pods etc…
This scale has two HMI’s for operating this scale as two seperate A=B sides. It has four seperate chutes for filling 1×4 or 4×1 up thermoform filling or can line operations.Equip-5612-Eriez HS-56
This Eriez HS-56 vibratory feeder is in great condition. The dimensions are 12W x 4D x 46L with a 6 width discharge. Comes with controller.
Equip-5613-Eriez HS-56
This brand new Eriez HS-56 vibratory feeder is in great condition. The dimensions are 12W x 6D x 38L. Comes with the controller.
Equip-5614-Eriez HS-56
This brand new Eriez HS-56 vibratory feeder is in great condition. The dimensions are 12W x 6D x 38L. Comes with the controller.
Equip-5615-Ishida CCW-RZ-216B-S/30-PB
Ishida CCW-RZ-216B-S/30-PB scales This Ishida CCW-RZ-216B-S/30-PB scales is in excellent working condition. If you need a scale to go into production right now…this is the scale for you Don’t wait it won’t last long This scale is perfect for just about any products. The large and deep vibratory pans are great for snack foods and chips.It also has twin discharge capabilities. This is a 16 head machine with booster hoppers making it a 32 head machine.This scale comes with single and/or twin discharge funnels.
Equip-5616-All Fill B-350
All Fill B350 Auger Filler This All Fill B350 auger filler has a 6foot tall stand with auger tooling included. If you need to fill powdered products and need to start now…this is the filler for you. It is complete and ready for production.
Equip-5617-All Fill B350
NEW All Fill B350 Auger Filler This New All Fill Auger Filler B350 is ready for production This auger filler has a short column so this filler can be mounted easily to any packaging machine. If you need a NEW auger filler for immediate use, this is the filer for you
Equip-5618-Hayssen CMD Ultima 12-16HP
Hayssen CMD Ultima 12-16HP packaging machine This Hayssen Ultima 12-16 HP machine is fully operational and ready for production. It is allen bradley controlled with stepper motors to pull the film.
Equip-5619-Matrix Packaging Machinery 2000
Matrix PM 2000 Series packaging machine This is a low cost and very reliable solution to adding packaging capacity
Equip-5620-Matrix Packaging Machinery Pro 201323WXXRIX
Matrix PM Pro Series packaging machine This Matrix Pro series machine is ready for production. This machine has a 24 long back seal and 14 wide jaws. IF you need to add capacity or replace a machine this is the machine for you
Equip-5621-Matrix Packaging Machinery Pro 201323WXXRIX
Matrix PM Pro Series packaging machine This Matrix Pro series machine is ready for production. This machine has a 24 long back seal and 14 wide jaws. IF you need to add capacity or replace a machine this is the machine for you
Equip-5622-Charles Ross & Son Company 42A-10 Cubic Foot Ribbon Blender
Charles Ross Son Company Ribbon Blenders This Ross 42A-10 cubic foot capacity blender is ready for production. This blender is in excellent condition. If you you need to blend small batch blends, this is the blender for you
Equip-5623-Matrix Packaging Machinery Elete Q 11 Quad Seal Bagger
and in almost new condition Matrix PM Elete Q11 Quad Seal bagger This Matrix Elete bagger is set up to produce true Quad Seal bags with a block bottom This machine also incldues a Videojet printer. This Matrix Elete bagger is a 2007 model. If you need a true Quad Seal bagger this is the machine for you Do not delay, this is a very rare find.
Equip-5624-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5625-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5626-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5627-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5628-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5629-Ishida CCW-RZ-214W-S/15-PB
Ishida CCW-RZ-214W-S/15-PB scales This scale is perfect for high speed smaller type bags, cartons, and container filling. This scale has 15cc size buckets. It is smaller and light weight for easy installation above packaging machinery. Last running crackers at a major manufacturer. Running about 105 WPM.
Equip-5630-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR250HS continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5631-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR250HS continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5632-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR-250-HS rotoseal continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5633-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR-250-HS rotoseal continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5634-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR-250-HS rotoseal continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5635-Rovema Packaging Machinery VPR-250-HS Rotoseal Continuous motion bagger
Rovema VPR-250-HS rotoseal continuous motion bagger This Rovema VPR-250-HS bagger is built for speed. It has rotary jaws and is a continuous motion bagger. All the controls have been upgraded in 2013 with Allen Bradley Panelview 1000, Kinetix 6000 servo drives If you need a high speed(over 100 bpm) machine machinery, this is the machine for you. This bagger was running crackers at a major manufacturer at speed over 110 bpm. Good quality continuous motion baggers are very rare on the market. If you need a continuous motion bagger don’t wait or you will miss out on this opportunity to separate yourself from your competition in terms of speed and performance.
Equip-5636-Rovema/Ishida Rovema VPR-250-HS Rotoseal Continuous motion baggers and Ishida CCW-RZ-214W-S/15-PB scales
Check out these Rovema VPR-250-HS Rotoseal Continuous motion baggers and Ishida CCW-RZ-214W-S/15-PB scale combos We have six of these units in stock If you need to run fast this is it Do not wait These won’t last long These baggers scale combos can run up to 120-130 bpm depending on product. High speed continuous motion bagger and scales are very, very rare on the equipment market. If you want to run over 100 bpm call now All of these baggers have been upgraded to allen bradley PLC and Kinetix 6000 drives. All six of these machines have consecutive serial numbers. This is a rare find Make sure you
Equip-5637-Ishida CCW-RZ-214W-S/15-PB
Check out these six Ishida scales Ishida Ishida CCW-RZ-214W-S/15-PB model machines These are all high speed scales designed for continuous motion baggers. All six of these scales are consecutive serial numbers This is a very very rare find in the equipment market. If you need really fast scales and all the same to standardize, these are these scales for you Don’t wait or you wil lose out on this rare opportunity
Equip-5638-Rovema Packaging Machinery VPR-250-HS Rotoseal continuous motion baggers
Check out all six of these Rovema VPR-250-HS Rotoseal continuous motion baggers All of these baggers are consecutive serial numbers If you need to run fast and understand the importance of standardization in your operation this if the opportunity for you Do not delay These will not last long. This is a very very rare opportunity to have 6 continuous motion baggers and all consecutive serial numbers Call now
Equip-5639-Ishida CCW-Z-214W-S/30 PB
Ishida CCW-Z-214W-S/30 PB model combination weigher scale This is a great low cost scale If you need a good scale at a low price, quickly, this is the scale.
Equip-5640-Spee-Dee CJ6S-306 twin filler
Spee-Dee Volumetric Cup Filler MODEL CJ6S-306 This Spee-Dee cup filler is a model CJ6S-306 twin filler has one control panel that controls two fillers. This filler is amazing I has a color touch screen with Check Weigher feedback so the filler automatically adjusts during production to keep your weights true. The entire filer is servo driven and top of the line. This package also includes many cup sizes as shown in the photo.
Equip-5641-Heat and Control Bucket Conveyor Model CV-BT-UR
Z bucket conveyors from Heat Control model CV-BT-UR This heat Control Z bucket conveyor is in pristine condition. It has a 36 in-feed length, 16′ discharge height, and a 36 discharge length. The belt is 14 wide. This unit is designed for wash down environments so it is perfect for any USDA facility. If you need a pristine conveyor like this, don’t wait It won’t last long.
Equip-5642-Eriez HS-56 Dual magnetic coil
Eriez HS-56 Dual Magnetic Coil vibratory feeder This Eriez HS-56 dual coil feeder is perfect for feeding Ishida and Yamato scales the pan is 6 deep x 82 long x 15 wide. This feeder can move a lot of high bulk density product. It also has the rounded discharge chute so you can achieve even product distribution on your scales very easily.
Equip-5643-Eriez HS-56 Dual Magnetic Coil
Eriez HS-56 Dual Magnetic Coil vibratory feeder This Eriez HS-56 dual coil feeder is perfect for feeding Ishida and Yamato scales the pan is 6 deep x 82 long x 15 wide. This feeder can move a lot of high bulk density product. It also has the rounded discharge chute so you can achieve even product distribution on your scales very easily.
Equip-5644-Heat & Control CV-FB-260E-G2
Heat Control Fastback CV-FB-260E-G2 product feed conveyor It has a retracting slide gate for feeding downstream fastbacks or to dump into a fastback feeding a Ishida or Yamato scale. This is the perfect product distribution conveyor for feeding multiple scales. The pan dimensions are 101 long x 21 wide at the base and 32 wide at the top x 8 deep. We have many in stock to feed 3 scales Don’t wait…these will not last long.
Equip-5645-Heat and Control CV-FB-260E-G2
Heat Control Fastback CV-FB-260E-G2 product feed conveyor It has a retracting slide gate for feeding downstream fastbacks or to dump into a fastback feeding a Ishida or Yamato scale. This is the perfect product distribution conveyor for feeding multiple scales. The pan dimensions are 101 long x 21 wide at the base and 32 wide at the top x 8 deep. We have many in stock to feed 3 scales Don’t wait…these will not last long.
Equip-5646-Heat & Control CV-FB-260E-G2
Heat Control Fastback CV-FB-260E-G2 product feed conveyor It has a retracting slide gate for feeding downstream fastbacks or to dump into a fastback feeding a Ishida or Yamato scale. This is the perfect product distribution conveyor for feeding multiple scales. The pan dimensions are 101 long x 21 wide at the base and 32 wide at the top x 8 deep. We have many in stock to feed 3 scales Don’t wait…these will not last long.
Equip-5647-H&C CV-FB-90E-G2
Heat and Control Fastback CV-FB-90E-G2 fastback conveyor This Fastback 90E is in pristine condition It is designed to feed Ishida and Yamato scale. It has the rounded discharge for equal distribution around your Ishida and Yamato scales. The pan dimensions are 104 lond x 19 wide at the top and 9 wide at the bottom x 8 deep. High Performance Packaging has 3 of these in stock These are perfect for building a 3 line product distribution system.
Equip-5648-Heat & Control CV-FB-90E-G2
Heat and Control Fastback CV-FB-90E-G2 fastback conveyor It is designed to feed Ishida and Yamato scale. It has the rounded discharge for equal distribution around your Ishida and Yamato scales. The pan dimensions are 104 long x 19 wide at the top and 9 wide at the bottom x 8 deep. High Performance Packaging has 3 of these in stock These are perfect for building a 3 line product distribution system.
Equip-5649-Heat and Control CV-FB-90E-G2
Heat and Control Fastback CV-FB-90E-G2 fastback conveyor This Fastback 90E is in pristine condition It is designed to feed Ishida and Yamato scale. It has the rounded discharge for equal distribution around your Ishida and Yamato scales. The pan dimensions are 104 long x 19 wide at the top and 9 wide at the bottom x 8 deep. High Performance Packaging has 3 of these in stock These are perfect for building a 3 line product distribution system.
Equip-5650-Hayssen Sandiacre Ultima 12-16 HR
Hayssen Sandiacre Ultima 12-16 HR packaging machine This Hayssen 12-16 HR machine is in pristine condition. This machine was rebuilt and controls updated in 2012. It has tuckers for gusseted bags. It has stepper motors, Allen Bradley controls. This machine is one not to be missed. If you need a Hayssen with updated controls this is the machine for you
Equip-5651-Hayssen Ultima 12-16HR
Hayssen Sandiacre Ultima 12-16 HR packaging machine This Hayssen 12-16 HR machine is in pristine condition. It was rebuilt with updated controls by Hayssen in 2013. It has tuckers for gusseted bags. It has stepper motors, Allen Bradley controls. This machine is one not to be missed. If you need a Hayssen with updated controls this is the machine for you
Equip-5652-Hayssen Sandiacre Ultma Micrologic 12-16HR
Hayssen Sandiacre Ultima 12-16 HR VFFS packaging machine This Hayssen machine was rebuilt by Hayssen in 2006. If you have Hayssen Micrologic machines in your operation and need another one this is the machine.
Equip-5653-Heat and Control CV-FB-260E-G2 AND CV-FB-260E-G2 units
complete Heat and Control Fastback product distribution system It is a 2011 system. The Fastback system has the 260E units and three 90E units. This Fastback system was built on the same job number and all units fit together perfectly to feed three Ishida or Yamato scales. High Performance Packaging can build the entire platform to support these units as well as the mezzanine to hold three scales. This system was designed for 8′ centers to the scales. If you need a product distribution system, this is the one for you. Do not wait. it will not last long and you will not find another like it in the equipment market.
Equip-5654-Heat & Control CV-FB-260E
Heat Control CV-FB-260E fastback This Fastback CV-FB-260E is in excellent running condition. If you need a 260E this is a great unit. It is a 2009 model. High Performance Packaging can build any pan to your length specifications. This is a wash down unit for USDA applications.
Equip-5655-Heat and Control CV-FB-260E
Heat Control CV-FB-260E fastback This Fastback CV-FB-260E is in excellent running condition. If you need a 260E this is a great unit. It is a 2009 model. High Performance Packaging can build any pan to your length specifications. This is a wash down unit for USDA applications.
Equip-5656-Toyo Jidoki TT12G
2008 TT12G Toyo Jidoki in great condition available . This unit has never been and it comes with a vacuum pump and all technical and operational manual.
Equip-5657-All Fill B350
B350 All Fill auger filler in great condition. Volt 220. 3 Phase.
Equip-5658-ActionPac Multi-14-D
This ActionPac Multi-14-D scale with touch screen controller also comes with a mezzanine stand, infeed product conveyor and quad bagger chute.Only for 3 months.
Equip-5659-Ishida CCW-NZ-210W-S/30-PB
Ishida CCW-NZ-210W-S/30-PB scale This Ishida multi head scale is a great scale for just about any product. It also has sift proof buckets for running powders. Check out the video of it cycling.
Equip-5660-Ishida CCW-Z-216B-D/30-PB
Ishida CCW-Z-216B-D/30-PB scale This Ishida CCW-Z-216B-D/30-PB scale is in fully operational condition and ready for production . This scale is a dual discharge scale for running wither twin VFFS vertical form fill seal machines or HFFS horizontal form fill seal machines in duplex.
Equip-5661-Lowe Industries C 155 H. Duty
Lowe Industries ribbon blender 155 Cubic Foot blender This Lowe Industries ribbn blender is in excellent condition and ready to start blending This Lowe ribbon blender is a 155 cubic foot blender. The blender is made out of 304 stainless steel. Shaft rotation is counter clockwise.
Equip-5662-Lowe Industries C 155 H. Duty
Lowe Industries ribbon blender 155 Cubic Foot blender This Lowe Industries ribbon blender is in excellent condition and ready to start blending This Lowe ribbon blender is a 155 cubic foot blender. The blender is made out of 304 stainless steel. Shaft rotation is counter clockwise. This blender has a pneumatic slide gate at the bottom for easy product discharge.
Equip-5663-Sweco US48C886
Sweco 48 inch sifter Sweco Model US48C886. This 48 inch Sweco has three stages. Equipped with 11 mesh, .75 mesh and 11 mesh screens.
Equip-5664-Sweco XS48S86GWTLWC
Sweco 48 2 stage XS48S86GWTLWC sifter This Sweco sifter has 16 mesh screens and .75 mesh. Sweco sifters sell fast so don’t wait.
Equip-5665-Smith Heimann Eagle Pack X-Ray Machine
Smith Heimann 2005 Eagle Pack X-Ray machine This Smith Heimann Eagle Pack X-Ray machine has 9.5 high x 18 wide aperture. This unit is in excellent condition.
Equip-5666-Fortress Vertex
Fortress Phantom 6.5 Aperture Vertex Metal Detectors
Equip-5667-Fortress Vertex
Fortress Phantom 6.5 Aperture Vertex Metal Detectors
Equip-5668-Fortress Vertex
Fortress Phantom 6.5 Aperture Vertex Metal Detectors
Equip-5669-Fortress Phantom
Fortress Phantom 8 Aperture Vertex Metal Detectors
Equip-5670-Safeline
Safeline Metal Detectors Free Fall with 5 aperture We have two of these in stock.
Equip-5671-Safeline
Safeline Metal Detectors Free Fall with 5 aperture We have two of these in stock.
Equip-5672-Heat & Control 200A
Heat Control Fastback 200A Packaging Conveyors .
Equip-5673-Heat & Control 200A
Heat Control Fastback 200A Packaging Conveyors .
Equip-5674-Heat & Control 200A Fastback
Heat Control Fastback 200A Packaging Conveyors .
Equip-5675-Heat & Control 200A
Heat Control Fastback 200A Packaging Conveyors .Total length of the pan is 138 long.
Equip-5676-Heat & Control
Heat Control Fastback 200A Packaging Conveyors .
Equip-5677-Heat and Control 200A Fastback
Heat Control Fastback 200A Packaging Conveyors The total length of the pan is 120 long.
Equip-5678-Matrix Packaging Machinery Pro Series 201308R
We have two of these Matrix Pro Series 201308R bagger with dual videojet printers available . These units are a 2009 with very little use and in great condition. The power requirements are 208-240 Volts/3 Phase 50/60 Hz. The current is 30 amps. The Air Requirements are 80 PSI 10-23 CFM. Bag dimensions that can be producted on this machine is up to 15 long bag and 13 wide.
Equip-5679-Heat & Control Fastback 90E CV-FB-90E-G2
New never 2016 Heat and Control Fastback 90E CV-FB-90E-G2 units This Heat and Control 90E fastback is perfect for feeding bucket elevators or a product feed line at 90 degree angles. The end of the pan is cut on a 45 degree angle for even product distribution onto another feeding device. This Fastback 90E has a non stick coating on the pan for sticky products. The pan dimensions are 21 wide x 6 deep x 66 long.
Equip-5680-Heat and Control Fastback 90E CV-FB-90E-G2
New never 2016 Heat and Control Fastback 90E CV-FB-90E-G2 units This Heat and Control 90E fastback is perfect for feeding bucket elevators or a product feed line at 90 degree angles. The end of the pan is cut on a 45 degree angle for even product distribution onto another feeding device. This Fastback 90E has a non stick coating on the pan for sticky products. The pan dimensions are 21 wide x 6 deep x 66 long.
Equip-5681-H&C Fastback 90E CV-FB-90E-G2
New never 2016 Heat and Control Fastback 90E CV-FB-90E-G2 units This Heat and Control 90E fastback is perfect for feeding bucket elevators or a product feed line at 90 degree angles. The end of the pan is cut on a 45 degree angle for even product distribution onto another feeding device. This Fastback 90E has a non stick coating on the pan for sticky products. The pan dimensions are 21 wide x 6 deep x 66 long.
Equip-5682-Heat and Control Fastback 90E CV-FB-90E-G2
New never 2016 Heat and Control Fastback 90E CV-FB-90E-G2 units This Heat and Control 90E fastback is perfect for feeding bucket elevators or a product feed line at 90 degree angles. The end of the pan is cut on a 45 degree angle for even product distribution onto another feeding device. This Fastback 90E has a non stick coating on the pan for sticky products. The pan dimensions are 21 wide x 6 deep x 81 long.
Equip-5683-Heat & Control Fastback CV-FB-260E-G2
New Never 2016 Heat Control Fastback CV-FB-260E-G2 units It has never been put on the production line. This Fastback 260E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 21 wide x 6 deep x 106 long.
Equip-5684-Heat & Control Fastback CV-FB-260E-G2
New Never 2016 Heat Control Fastback CV-FB-260E-G2 units It has never been put on the production line. This Fastback 260E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 21 wide x 6 deep x 106 long.
Equip-5685-Heat and Control Fastback CV-FB-260E-G2
New Never 2016 Heat Control Fastback CV-FB-260E-G2 units It has never been put on the production line. This Fastback 260E is designed to feed Ishida and Yamato combination scales. The pan is coated with a non stick coating for sticky and hard to move type products. The pan dimensions are 21 wide x 6 deep x 144 long.
