bagger
Showing all 7 results
-
Equip-6191-WeighPack Swifty 1200 Premade Bagger
WeighPack Systems Swifty Bagger Model 1200 Preformed Pouch Packager available . Capable of speeds up to 30 bags per minute (bpm). Has a bag size range of 6″ -12″ wide; 8″ – 18″ long. Has a 43″ infeed magazine conveyor, and a 30″ discharge conveyor, no-bag-no-fill, and product settler under bag fill station. Also, has an Allen Bradley MicroLogix 1400 PLC with Allen Bradley Panelview plus 600 HMI, A/B Powerflex 4M Drive. This WeighPack Swifty 1200 Premade Bagger is all Stainless Steel construction, mounted on casters. The electrical requirements are: 3/60/230 Volt, 35Amp.
Equip-6216-Hayssen 12-16HR VFFS
2005 Hayssen 12-16HR bagger with Allen Bradley controls and stepper motor driven pull belts and measuring roller. Volts: 120, Phase: 1, Hertz: 50/60, AMPS: 30.
Equip-6222-Hayssen Sandiacre Novus 350 Continuous Motion VFFS
Hayssen Sandiacre Novus 350 bagger . This Hayssen Novis 350 is rated up to 200 bags per minute If you need speed this is the bagger for you. All Stainless Steel Design, with S/S Forming Tube, Aprox. 5″ Dia., with (2) Rolls, Aprox. 34″ L, with S/S Rack, with Allen-Bradley PanelView Plus 700 Touchscreen Display.
TECHNICAL DATA:
Production Rate
Up to 200 bags per minute
Package Range
Min Width: 60mm (2.36”)
Min Length: 60mm (2.36”)
Max Width: 380mm (14.96”)
Maximum Length: Infinitely variable from 60mm
Power Requirements
20 Amp, 3-phase neutral and earth, 10KVA
Air Requirements
Heat-seal mode (with air operated vacuum pump) = 600 l/min
Poly-sealing mode = additional 1,800 l/min
Air consumption is normalizedPRODUCT DETAIL:
High Speed Continuous Motion
Up to 220 bags per minute
Servo-driven motors
Allen-Bradley ControlLogix with Kinetix 6000 system allows for wide speed range and wide range of bag styles
Quad Pack Capability
Environmental protection with fully enclosed stainless steel construction and stainless steel top tray
Slim-line footprint
Reduced setup times
Modular assemblies for quick changeoverEquip-6223-Hayssen Sandiacre Novus 350 Continuous Motion VFFS
Hayssen Sandiacre Novus 350 bagger . This Hayssen Novis 350 is rated up to 200 bags per minute If you need speed this is the bagger for you. All Stainless Steel Design, with S/S Forming Tube, Aprox. 5″ Dia., with (2) Rolls, Aprox. 34″ L, with S/S Rack, with Allen-Bradley PanelView Plus 700 Touchscreen Display.
TECHNICAL DATA:
Production Rate
Up to 200 bags per minute
Package Range
Min Width: 60mm (2.36”)
Min Length: 60mm (2.36”)
Max Width: 380mm (14.96”)
Maximum Length: Infinitely variable from 60mm
Power Requirements
20 Amp, 3-phase neutral and earth, 10KVA
Air Requirements
Heat-seal mode (with air operated vacuum pump) = 600 l/min
Poly-sealing mode = additional 1,800 l/min
Air consumption is normalizedPRODUCT DETAIL:
High Speed Continuous Motion
Up to 220 bags per minute
Servo-driven motors
Allen-Bradley ControlLogix with Kinetix 6000 system allows for wide speed range and wide range of bag styles
Quad Pack Capability
Environmental protection with fully enclosed stainless steel construction and stainless steel top tray
Slim-line footprint
Reduced setup times
Modular assemblies for quick changeoverEquip-6234-2014 Kliklok Woodman Apache Continuous Motion Vertical Form-Fill-Seal Machine
Sale! Original price was: $75,000.00.$45,000.00Current price is: $45,000.00.2014 Kliklok Woodman Apache Continuous Motion Vertical Form-Fill-Seal Machine . This Woodman Apache baggers is rated up to 200 bags per minute. The electrical requirements are 480V, 80AMPS, 60HZ, 3PH, Disconnect Rating 30A, Short-circuit rating 100KA, and Largest circuit amp 25. Also, this Woodman comes with a Videojet DataFlex 6420 printer.
Equip-6247-2018 TDI Packsys VFFS Bagger BVS-220
TDI Form, Fill & Seal with Piston Filler
– Model BVS-220, serial#BZP18-0008 built 2018
– 3 sided seal (not a fin seal pouch)
– Piston filler with stainless steel hopper (approx. 6 ounce volume piston)
– Electric eye for printed film
– 6″ wide sealing jaws
– Digital temperature controls
– Forming tube mounted on machine makes a 2.75″ wide flat bag (approx. 1.75″ diameter forming tube)
– 4 additional forming tubes included: Apprx. 3/4″, 1.25″, 1.75″ and 2″ diameter forming tubes (not flat bag dimensions)
– Output: 20 to 50/minute
– 3 phase, 60 cycle, 240 volt
– Never in productionEquip-6296-Hayssen 12-16HR VFFS Bagger
2006 Hayssen 12-16HR bagger . This Hayssen Ultima 12-16HR packaging machine is missing the operator interface screen. HPP will purchase and install this screen for customer and test prior to shipping.
Showing all 7 results
