2014 Deamco Z-Configuration Bucket Elevator, M/N BES-12P-T-X-SST . 13′ 1″ discharge height, 36″ infeed length, and 30″ outfeed length. The buckets are 12″ in length x 4″ width x 3″ deep. The electrical requirements are 240/480 Volts, 3 Phase. This bucket elevator is capable of moving 350 cu ft per hour. If you know the bulk density of your product, multiply is by 350 and that will give you the total pounds per hour.
2014 Deamco Z-Configuration Bucket Elevator, M/N BES-12P-T-X-SST . 13″ 1″ discharge height, 36″ infeed length, and 30″ outfeed length. The buckets are 12″ in length x 4″ width x 3″ deep. The electrical requirements are 240/480 Volts, 3 Phase. This bucket elevator is capable of moving 350 cu ft per hour. If you know the bulk density of your product, multiply is by 350 and that will give you the total pounds per hour.
| Model | BES-12P-T-X-SST |
|---|
| Year | 2014 |
|---|
| Assembly |
|---|
This never Deamco BEH-09P-T-X-S Z-shape Overlapping Bucket Elevator is perfect for just about any FDA food product. in feed length is approximately 6′, the discharge height is 7′ and the discharge length is approximately 4′. This Deamco bucket elevator is still on the OEM pallet.
Like New/never Frazier and Son Whiz Lifter C-WD with 9x20x5 buckets This Frazier and Son Whiz Lifter Z bucket conveyor is in immaculate condition. It has never been . All stainless steel wash down. This Z bucket elevator has a 4′ infeed and a 3′ discharge length. The discharge height can beeither 12′, 14′ or 17′ depending on which vertical inserts you install. If you need a Z bucket conveyor, do not delay…This will not last long
This 10′ discharge Bucket Conveyor is in good condition. It has upgrade VFD motor controls with level control. The belt is in good condition.
